SD12 gbadaa oghere hama elu arụmọrụ

ỤLỌ

Ụdị

KPỌTỤRỤ ANYỊ

SD4 / SD5 / SD6 / SD8 / SD10 / SD12 gbadaa oghere hama elu arụmọrụ

Ụdị nhazi: Nrụpụta & igwe CNC

Nkọwa ngwugwu: igbe osisi / akwụkwọ

Aha: Globorx

Ihe: Alloy steel

Email：

info@zzgloborx.com

Nzaghachi

SD4 / SD5 / SD6 / SD8 / SD10 / SD12 gbadaa oghere hama elu arụmọrụ

aha:ntinye ngwa ngwa / ogologo ndụ / arụmọrụ dị elu / ụlọ ọrụ mmepụta ihe / ụlọ ọrụ mmepụta ihe

+SD4/SD5/SD6/SD8/SD10/SD12

+ gbadaa hama oghere / mmetụta maka igwu ala / mgbawa / olulu mmiri

Atụmatụ:

1.New hammers na-dabere na Ngwuputa ọnọdụ, mma site elu technology, International elu-ọkọlọtọ ihe na elu usoro na-ekwe nkwa mma.

2.Ngwunye ngwa ngwa ngwa ngwa.

3.Enhanced hardness ịgbasa ndụ hama, na ala na-eji na-eri.. obere oriri nke ọkụ eletrik na nnukwu mmetụta ike.

4. Ezi nnyefe nke ike. A na-anakwere echiche nke oge a na nhazi nhazi, nke na-eme ka nrụgide nrụgide dịkwuo ogologo, njupụta nrụgide dị ala, na ndụ piston dị ogologo.

Ngwa nke hama DTH

A na-eji hama DTH eme ihe maka mkpọpu oghere na ịgbawa agbawa, etinyere ya n'ọrụ na Ngwuputa, ebe a na-egwupụta marble ma ọ bụ olulu mmiri na ọrụ owuwu ndị ọzọ.

Gịnị kpatara ịhọrọ anyị:

1.Selected special alloy steel

2.Nyocha anụ ahụ na nke kemịkal na nyocha maka akụrụngwa na CNC machining nhazi na ọgwụgwọ okpomọkụ.

3.Fast mkpọpu ngwa ngwa na ezi mmetụta akụ na ụba

4.Effective pre-sales nkwurịta okwu na mgbe-sales ọrụ

5.Mee ka arụ ọrụ dị mfe ma na-arụpụta ihe

SD系列潜孔冲击器

SD Series DTH Hammers

零部件名称 Nkọwa ihe	重量ibu(kg)
零部件名称 Nkọwa ihe	SD4	SD5	SD6	SD8	SD10	SD12
1.接头 Top Sub	6.50	13.70	20.00	34.00	59.00	70.00
2.接头O形圈 “O”Mgbanaka nke Top Sub	0.10	0.015	0.015	0.015	0.03	0.04
3.逆止阀 Lelee Valve	0.35	0.70	0.70	1.20	1.40	2.00
4.弹簧 Mmiri	0.05	0.10	0.10	0.10	0.30	0.10
5.配气座 Onye nkesa ikuku	1.50	2.00	3.50	6.00	10.50	16.00
6.内缸 Silinda dị n'ime	2.10	2.80	4.20	6.50	12.50	25.00
7.活塞 Piston	8.50	15.00	23.00	42.50	77.00	113.00
8.外缸 Silinda mpụga	15.30	24.00	30.00	59.00	110.00	175.00
9.衬套 Aka aka eduzi	1.30	2.60	2.50	6.00	11.5	25.00
10.卡环O型圈 “O”Mgbanaka nke nkwụsị mgbanaka	0.005	0.01	0.01	0.01	0.01	0.01
11.卡环 Kwụsị mgbanaka	0.20	0.50	0.50	1.20	1.50	4.50
12.卡钎套 Dirve Chuck	4.00	7.50	7.50	16.00	31.50	48.00
13.钻头 Kwuonụ Bit	9.80	16.00	27.00	37.00	108.00	165.00
技术参数Data teknụzụ
	SD4	SD5	SD6	SD8	SD10	SD12
总长 (不含钻头) Ogologo (Enweghị Bit)	1012mm	1090mm	1182mm	1330mm	1525mm	1860mm
总重（不含钻头） Ibu (Enweghị Bit)	40.00kg	67.00kg	90.00kg	174kg	316kg	480kg
冲击器外径 Dayameta Mpụga	φ99mm	φ126mm	φ146mm	φ180/φ185mm	Φ226mm	Φ275mm
可配钻头钎柄 Bit Shank	SD4	SD5	SD6	SD8	SD10	SD12
钻孔范围 OghereOke	φ110-φ135mm	φ155-φ190mm	φ155-φ203mm	φ195-φ254mm	Φ254-φ311mm	Φ305-φ445mm
后接头螺纹 Eriri Njikọ	API 2 3/8” Reg	API 2 3/8” Reg API3 1/2” Reg API2 7/8” Reg	API 3 1/2” Reg	API 4 1/2” Reg	API 6 5/8” Reg	API 6 5/8” Reg
可用工作风压 Nrụgide arụ ọrụ	1.2-2.0Mpa	1.3-2.3Mpa	1.5-2.5Mpa	1.5-3.0Mpa	2.0-3.5Mpa	2.0-3.5Mpa
在17bar时的冲击频率 Ọnụego mmetụta na 17Bar	30HZ	28HZ	25HZ	22HZ	20HZ	20HZ
推荐转速 Ọsọ ntụgharị akwadoro	25-40r/min	20-35r/min	20-30r/min	15-25r/min	20-35r/min	15-25r/min
耗风量 Oriri ikuku	1.0Mpa:6m3/min	1.0Mpa:7m3/min	1.0Mpa:9m3/min	1.0Mpa:12m3/min	1.0Mpa:18m3/min	1.0Mpa:28m3/min
	1.8Mpa:9m3/min	1.8Mpa:14m3/min	1.8Mpa:18m3/min	1.8Mpa:22m3/min	1.8Mpa:40m3/min	1.8Mpa:50m3/min
	2.4Mpa:14m3/min	2.4Mpa:19m3/min	2.4Mpa:26m3/min	2.4Mpa:28m3/min	2.4Mpa:65m3/min	2.4Mpa:71m3/min