DHD360 mmetụta maka Ngwuputa Elu arụmọrụ

ỤLỌ

Ụdị

KPỌTỤRỤ ANYỊ

DHD340/DHD350/DHD360 mmetụta maka Ngwuputa Elu arụmọrụ

Ụdị nhazi: Nrụpụta & igwe CNC

Nkọwa ngwugwu: igbe osisi / akwụkwọ

Aha: Globorx

Ihe: Alloy steel

Email：

info@zzgloborx.com

Nzaghachi

DHD340/DHD350/DHD360 mmetụta maka Ngwuputa Elu arụmọrụ

aha:ntinye ngwa ngwa / ogologo ndụ / arụmọrụ dị elu / ụlọ ọrụ mmepụta ihe / ụlọ ọrụ mmepụta ihe

+DHD340/DHD350/DHD360/DHD380/4”/5”/6”/8”

+ gbadaa hama oghere / mmetụta maka igwu ala / mgbawa / olulu mmiri

Atụmatụ:

1.New hammers na-dabere na Ngwuputa ọnọdụ, mma site elu technology, International elu-ọkọlọtọ ihe na elu usoro na-ekwe nkwa mma.

2.Ngwunye ngwa ngwa ngwa ngwa.

3.Enhanced hardness ịgbasa ndụ hama, na ala na-eji na-eri.. obere oriri nke ọkụ eletrik na nnukwu mmetụta ike.

4. Ezi nnyefe nke ike. A na-anakwere echiche nke oge a na nhazi nhazi, nke na-eme ka nrụgide nrụgide dịkwuo ogologo, njupụta nrụgide dị ala, na ndụ piston dị ogologo.

Ngwa nke hama DTH

A na-eji hama DTH eme ihe maka mkpọpu oghere na ịgbawa agbawa, etinyere ya n'ọrụ na Ngwuputa, ebe a na-egwupụta marble ma ọ bụ olulu mmiri na ọrụ owuwu ndị ọzọ.

Gịnị kpatara ịhọrọ anyị:

1.Selected special alloy steel

2.Nyocha anụ ahụ na nke kemịkal na nyocha maka akụrụngwa na CNC machining nhazi na ọgwụgwọ okpomọkụ.

3.Fast mkpọpu ngwa ngwa na ezi mmetụta akụ na ụba

4.Effective pre-sales nkwurịta okwu na mgbe-sales ọrụ

5.Mee ka arụ ọrụ dị mfe ma na-arụpụta ihe

零部件名称 Nkọwa ihe	重量ibu(kg)
零部件名称 Nkọwa ihe	DHD35A	DHD45A	DHD55A	DHD65A		DHD85A
1.接头 Top Sub	4.20	6.50	13.70	20.00		34.00
2.接头O形圈 “O”Mgbanaka nke Top Sub	0.01	0.01	0.015	0.02		0.015
3.逆止阀 Lelee Valve	0.20	0.35	0.70	0.70		1.20
4.弹簧 Mmiri	0.02	0.05	0.10	0.10		0.10
5.配气座 Onye nkesa ikuku	0.80	1.50	2.00	3.50		6.00
6.内缸 Ime Silinder	1.30	2.10	2.80	4.20		6.50
7.活塞 Piston	5.50	8.50	15.00	23.00		42.50
8.外缸 Mpụga Silinder	9.50	15.20	24.00	31.50		60.00
9.衬套 Aka aka eduzi	1.00	1.30	2.60	6.50		5.30
10.卡环O型圈 “O”Mgbanaka nke nkwụsị mgbanaka	0.05	0.01	0.01	0.01		0.01
11.卡环 Kwụsị mgbanaka	0.15	0.30	0.50	0.60		1.20
12.卡钎套 Dirve Chuck	1.90	3.40	6.50	6.00		17.50
13.钻头 Kwuonụ Bit	5.00	9.00	16.00	26.00		40.00
技术参数Data teknụzụ
	DHD35A	DHD45A	DHD55A		DHD65A	DHD85A
总长 (不含钻头) Ogologo (Na-enweghị bit)	888mm	1011mm	1110mm	1238mm		1359mm
总重（不含钻头） Ibu (Enweghị Bit)	25.00kg	43.20kg	69.00kg	98.00kg		175.00kg
冲击器外径 Mpụga Dayameta	φ82mm	φ99mm	φ126mm	φ142/146mm		φ180/185mm
可配钻头钎柄 Bit Shank	IR3.5	COP44/DHD340	COP54/DHD350R	COP64/DHD360		COP84/DHD380
钻孔范围 OghereOke	φ90-φ115mm	φ110-φ135mm	φ135-φ155mm	φ155-φ203mm		φ195-φ254mm
后接头螺纹 Njikọ Eriri	API2 3/8” Reg	API2 3/8” Reg	API2 3/8” Reg API3 1/2” Reg API2 7/8” RegA 2 7/8” IF	API3 1/2” Reg		API4 1/2” Reg
可用工作风压 Nrụgide arụ ọrụ	1.0-1.5Mpa	1.2-2.0Mpa	1.3-2.3Mpa	1.5-3.0Mpa		1.5-3.0Mpa
在17bar时的冲击频率 Ọnụego mmetụta na 17Bar	25HZ	30HZ	28HZ	25HZ		22HZ
推荐转速 Akwadoro Ọsọ ntụgharị	25-40r/min	22-35r/min	20-35r/min	20-30r/min		15-25r/min
耗风量 Oriri ikuku	1.0Mpa:3.8m3/min	1.0Mpa:6m3/min	1.0Mpa:7m3/min	1.0Mpa:9m3/min		1.0Mpa:12m3/min
	1.5Mpa:7.5m3/min	1.8Mpa:10m3/min	1.8Mpa:14m3/min	1.8Mpa:18m3/min		1.8Mpa:22m3/min
		2.4Mpa:15m3/min	2.4Mpa:19m3/min	2.4Mpa:26m3/min		2.4Mpa:28m3/min