M80 saukar da guduma ramin Saurin shigarsa

GIDA

TUNTUBE MU

M40/M50/M60/M80 saukar da guduma ramin Saurin shigarsa

Nau'in sarrafawa: Forging & CNC machining

Cikakkun bayanai: katako / akwatunan takarda

Marka: Globorx

Material: Alloy karfe

Imel：

info@zzgloborx.com

Jawabin

M40/M50/M60/M80 saukar da guduma ramin Saurin shigarsa

Suna: saurin shiga / tsawon rai / babban inganci / masana'anta masu kaya / masana'anta wholesale

+M40/M50/M60/M80

+ saukar da guduma / mai tasiri don hakar ma'adinai/quarry / rijiya

Siffofin:

1.New hammers an tsara su bisa yanayin hakar ma'adinai, haɓaka ta hanyar fasaha mai mahimmanci, kayan aiki masu mahimmanci na duniya tare da ingantaccen tsari mai garanti.

2.Mai saurin hakowa.

3.Ingantacciyar ƙarfi don faɗaɗa rayuwar guduma, da rage yawan amfani da farashi.. ƙarancin amfani da wutar lantarki tare da babban tasiri mai ƙarfi.

4. Kyakkyawan watsa wutar lantarki. Ka'idar zamani an karɓa a cikin ƙirar tsarin, wanda ke sa tsawon lokacin tashin hankali ya daɗe, girman ƙarfin damuwa, kuma rayuwar piston ya fi tsayi.

Abubuwan da aka bayar na DTH hammer

Ana amfani da guduma na DTH don hako rami da fashewa, galibi ana amfani da su a cikin Ma'adinai, dutsen Marble ko hako rijiyoyi da sauran ayyukan gini.

Me yasa zabar mu:

1.Zaɓaɓɓen ƙarfe na musamman da aka zaɓa

2.Tsarin jiki da sinadarai da gwaji don kayan albarkatun kasa da CNC machining da kuma maganin zafi.

3.Fast hakowa gudun da kyau tattalin arziki sakamako

4.Effective pre-tallace-tallace sadarwa da kuma bayan-tallace-tallace da sabis

5.Make ayyuka mafi sauƙi kuma masu amfani

M系列潜孔冲击器

M jerin guduma DTH

零部件名称 Bayanin Abu	重量nauyi (kg)
零部件名称 Bayanin Abu	M40	M50	M60		M80
1.接头 Babban Sub	6.50	13.70	20.00		34.00
2.接头O形圈 “O”Ring Of Top Sub	0.10	0.015	0.015		0.015
3.逆止阀 Duba Valve	0.35	0.70	0.70		1.20
4.弹簧 bazara	0.05	0.10	0.10		0.10
5.配气座 Mai Rarraba Iska	1.50	2.00	3.50		6.00
6.内缸 Silinda na ciki	2.10	2.80	4.20		6.50
7.活塞 Fistan	8.50	15.00	23.00		42.50
8.外缸 Silinda na waje	14.80	24.00	26.00		61.00
9.衬套 Hannun Jagora	1.80	2.60	4.80		5.30
10.卡环O型圈 “O”Zoben Tsayawa	0.005	0.01	0.01		0.01
11.卡环 Tsayawa Ring	0.30	0.70	0.80		1.50
12.卡钎套 Dirve Chuck	3.80	6.50	4.20		17.30
13.钻头 Drill Bit	6.60	13.50	23.00		31.00
技术参数Bayanan Fasaha
	M40	M50		M60	M80
总长（不含钻头） Tsawon (Ba tare da Bit)	1005mm	1110mm	1161mm		1338mm
总重（不含钻头） Nauyi (Ba tare da Bit)	40.00kg	68.50kg	90.00kg		176kg
冲击器外径 Diamita na Waje	φ99mm	φ126mm	φ142mmφ144mm φ146mmφ148mm		φ180/φ185mm
可配钻头钎柄 Bit Shank	M40	M50	M60		M80
钻孔范围 RaminRage	φ110-φ135mm	φ155-φ190mm	φ155-φ203mm		φ195-φ254mm
后接头螺纹 Zaren Haɗi	API2 3/8” Reg	API2 3/8” Reg API3 1/2” Reg API2 7/8” Reg	API2 7/2” Reg API3 1/2” Reg 2 7/8” IF		API4 1/2” Reg
可用工作风压 Matsin Aiki	1.2-2.0Mpa	1.3-2.3Mpa	1.5-2.5Mpa		1.5-3.0Mpa
在17bar时的冲击频率 Yawan Tasiri a 17Bar	30HZ	28HZ	25HZ		22HZ
推荐转速 Nasihar Gudun Juyawa	25-40r/min	20-35r/min	20-30r/min		15-25r/min
耗风量 Amfani da iska	1.0Mpa:5m3/min	1.0Mpa:7m3/min	1.0Mpa:9m3/min		1.0Mpa:12m3/min
	1.8Mpa:9m3/min	1.8Mpa:14m3/min	1.8Mpa:18m3/min		1.8Mpa:22m3/min
	2.4Mpa:14m3/min	2.4Mpa:19m3/min	2.4Mpa:26m3/min		2.4Mpa:28m3/min