178-254mm gbadaa bọtịnụ mkpọpu oghere.

ỤLỌ

Ụdị

KPỌTỤRỤ ANYỊ

DHD360/DHD65A/6"/6 inch 152/165/6 1/2"/178-254mm gbadaa bọtịnụ mkpọpu oghere.

Ụdị nhazi: Nrụpụta & igwe CNC

Nkọwa ngwugwu: igbe osisi / akwụkwọ

Aha: Globorx

Ihe: Tungsten carbide + Alloy steel

Email：

info@zzgloborx.com

Nzaghachi

DHD360/DHD65A/6"/6 inch 152/165/6 1/2"/178-254mm gbadaa bọtịnụ mkpọpu oghere.

Aha:elu mma / mma penetrating / ezi ọsọ / ọnụ nke ọma / factory soplaya / ngwa ngwa nnyefe

+DHD360/DHD65A/6”/6 inch

+152/165/6 1/2”/178-254mm down the hole drilling button bits

+ na Ngwuputa / mgbawa / olulu mmiri / olulu mmiri / mmanụ gas / ọdụ ụgbọ mmiri / onye na-ewu ụlọ

Uru nke Globorx gbadaa oghere oghere

1.The ogologo ndụ nke akuakuzinwo: na alloy ihe onwunwe, na ogologo iji ndụ nke ka mma karịa yiri ngwaahịa;

2.High mkpọpu arụmọrụ: bọtịnụ mkpọpu na-eyi na-eguzogide, nke mere na egwu nwere ike na-adị nkọ mgbe niile, si otú ahụ na-eme ka ọsọ nke ntanye ahụ dịkwuo mma.

3.Good arụmọrụ: Ụlọ ọrụ anyị bit nwere ike na-eyi na-eguzogide na ezigbo dayameta nchebe na ike ime ka carbide bọtịnụ ezé na-eji rụọ ọrụ nke ọma.

4.The ojiji nke a dịgasị iche iche: omume na-egosi na bit kwesịrị ekwesị maka carbonate nkume, limestone, nzu, ụrọ nkume, siltstone, sandstone na ndị ọzọ dị nro na ike nkume guzobe.

Ngwa:A na-ejikarị ya na nyocha ala ala, ogbunigwe coal, nchekwa mmiri na ike mmiri, okporo ụzọ, okporo ụzọ ụgbọ oloko, akwa mmiri, onye na-ewu ụlọ, wdg.

Gịnị kpatara ịhọrọ anyị:

1.Experience nke imewe na imepụta ihe karịrị afọ 25 na ụlọ ọrụ egwu egwu nkume

2.Total njikwa mma site na ịzụrụ ihe eji eme ihe iji kpoo ọgwụgwọ na nnyefe ngwugwu.

3.CNC machining center na nyocha anụ ahụ na kemịkalụ na nyocha maka akụrụngwa na nhazi nhazi

4.Selected nickel-alloy special steel na cimented carbide buttons

5.Effective pre-sales nkwurịta okwu na mgbe-sales ọrụ

6.Mee ka arụ ọrụ dị mfe ma na-arụpụta ihe.

直径 Dayameta		合金数量、直径 Enweghị dayameta bọtịnụ x mm		角度 Bọtịnụ akụkụ °	气孔 Ikuku oghere	重量 Ibu (Kg)	编号 Akụkụ Mba
mm	inch	边齿 Nlele	中齿 N'ihu	角度 Bọtịnụ akụkụ °	气孔 Ikuku oghere	重量 Ibu (Kg)	编号 Akụkụ Mba
DHD65A冲击器用钻头Drill ibe n'ibe maka DHD65A hama
152	6	8x18	4x16+4x14	38	2	23	DHD 65-152DCC8
165	6 1/2	8x18	8x16	38	2	24	DHD 65-165DFF8
178	7	8X18	10X16	38	2	26	DHD 65-178DFF8
185	7 1/4	8x18	10x16	38	2	26.8	DH 65-185DFF8
194	7 1/2	10x18	13x16	38	2	27.5	DHD 65-194DFF8
203	8	10x18	8x18+6x16	38	2	31	DHD 65-203DCC8
216	8 1/2	10x18	8x18+6x16	38	2	47	DHD 65-216DCC8
235	9 1/4	12X18	30X16	38	2	54	DH 65-235DFF8
254	10	12x18	12x18+8x16	38	2	65	DHD 65-254DCC8